The redesigned Pulsar™ II small-diaphragm cardioid condenser microphone takes M-Audio’s pencil condenser technology to an even higher level. Designed in the U.S.A. by veteran engineers and hand-assembled to exacting standards, this precision microphone exhibits quality comparable to that of vintage classics. New features like -10dB pad and 80Hz high-pass filter switches, higher SPL than the original and a redesigned solid-brass backplate deliver smooth, accurate sound in the studio and on stage. The Pulsar II has many applications, including drum overheads, acoustic guitar, piano, close-miking strings and woodwinds, room miking and more. Top Features Professional small-capsule condenser microphone > flexible applications 3/4", 6-micron Mylar evaporated gold diaphragm > sensitive and accurate Solid brass backplate > natural, transparent sound Class-A FET electronics > low distortion Switchable 10dB pad and 80Hz high-pass filter > adaptable
Click here to buy
More info: M-Audio PULSAR-II Small Diaphragm Condenser (Pair)
Studio and Location Multi Powered Condenser Microphone The M3 is an extremely versatile microphone that is at home in the studio, on location, or wherever a low-noise wide-response cardioid condenser microphone is demanded. An end address condenser microphone, the M3 features a heavy-duty metal body, category leading low self-noise, three stage PAD (O, -10db, -20db), a battery status LED and a High Pass Filter. The M3 also comes complete with windshield and a stand mount, and can be powered via a 9V battery or 24-48V Phantom. Features: Rugged metal body Internal capsule shock mount Switchable High-Pass Filter @ 80Hz-12dB/Oct Three step PAD - Flat, -10dB and -20dB Low handling noise Heat treated high strength head mesh 9V battery power or 24/48V phantom power Battery status indicator
Click here to buy
More info: Rode M3 Dual Power Condenser Microphone
KRK ROKIT RP-10S POWERED SUBWOOFER: A Rokit To Bring Out The Subs Subsonic sound is a critical part of your mix. So the KRK Rokit powered series of close-field monitors wouldn?t be complete without a compatible low-end companion. The RP-10S subwoofer was designed to deliver an articulate linear bass extension specifically tailored to fit the Rokit powered monitor’s spectral balance. The RP-10S features a level control, phase switch and variable filter control as well as the full complement of input options offered on the Rokit full-range powered monitors. There’s even a removable grill. Features: 10" high excursion glass aramid composite woofer Input: XLR, RCA & 1/4" TRS - 10k ohm; balanced/unbalanced Amplification: 225 watts peak; variable low pass filter + phase; fixed 80Hz high pass filter; active limiter Frequency response: 36Hz - 50Hz Video shielding: Yes Size: 15"h x 14"w x 15-11/16"d. Wt. 42 lbs.
Click here to buy
More info: KRK RP10S 10-Inch Powered Studio Subwoofer (Each)
FREE! Steel Speaker Stand with purchase (.99 Value) Add item above to cart to receive free gift at checkout QSC HPR152i 15-In 2-Way Powered Speaker The new HPR Series offers performers the power, technology and legendary reliability of QSC amplification combined with the simplicity and convenience of powered loudspeaker systems. Whether your application is vocal reinforcement, dance music or full-tilt rock and roll sound, there’s an HPR speaker configuration for you. The bi-amplified 15″ 2-way HPR152F is a versatile speaker that’s at home in nearly any sound reinforcement setting. A high-power low-frequency driver with a 3″ voice-coil provides extension down to 50 Hz. The 1.75″ (diaphragm) compression driver on a 90? x 60? horn delivers smooth high frequencies up to 20 kHz. A 500 watt (400 LF / 100 HF) power module includes a 100 Hz high-pass filter (HPF) for use in subwoofer-equipped systems. Specifications: Configuration: 15″ 2-way LF: 15″ cone transducer with 3″ voice coil HF: 1.75″ diaphragm compression driver Frequency Response (-6 dB): 53 Hz - 18 kHz Frequency Range (-10 dB): 50 Hz - 20 kHz Nominal coverage, -6 dB 90? x 60? Maximum SPL (1 meter): 135 dB peak Power output: 400W LF Class H, 100W HF Class AB+B Input impedance: 22k balanced, 11k unbalanced Controls: Gain, Low-cut filter, Front LED On/Off, Power, Circuit breaker Indicators: Power, Signal, Limit Cooling: Convection Amplifier protection: Thermal and output power limiting Current consumption at 120 VAC (1/8 power EIA noise): 1.5A Enclosure: Painted Birch plywood Finish: Black textured paint Grille: Powder coated 16 gauge steel Connectors: Balanced female XLR line level input, Balanced male XLR full range line level out Size: 32″ H x 19″ W x18″ D Weight: 100 lbs. Why choose powered loudspeakers?: The powered speaker has become a staple for mobile DJs, musicians and AV professionals alike. The simplicity and scalability of these systems is the big draw. After all, what could be easier than just connecting the output of your DJ or live sound mixer directly to the speaker and turning everything on? For those who have been reluctant to join the powered speaker party because you felt that powered speaker amplification fell short of rack-mount amp quality, you are officially out of excuses. Why choose QSC’s HPR Series?: There’s a QSC amplifier inside each HPR! Now you can get the legendary performance and reliability of QSC’s rack mount amplifiers built into a powered loudspeaker. The power module is designed with the same top-quality components and rigorous standards you expect from any QSC amplifier. QSC is regarded as one of the leading amplifier manufacturers in the world. We have over 35 years experience making professional-grade amplifiers. When you buy an HPR Series powered loudspeaker, you know it is backed by the QSC quality and reliability you’ve come to expect. Many powered speaker amplifi
Click here to buy
More info: QSC HPR152i 15 In 2 Way Powered Speaker
