DB TECHNOLOGIES Basic 200: Powered Speaker With 320 Watts The Basic 200 speakers from dB Technologies is made for the economic range of the market, providing a high quality product with great audio features. Like any dB Technologies product, the Basic 200 offers high reliability, market driven features and is designed to match the demands of beginners, DJs, schools, churches and many other applications where budget orientated solutions are required. The Basic 100 is equipped with a 12" woofer and a 1"HF driver, powered by two separate amplifiers with integrated phase and sound correction circuits. The speaker is protected against overload and distortion through a built in Limiter, with a Status-LED indication. The input sensitivity can be switched from line to microphone level, using the XLR or 1/4" input plug. The output level can be adjusted with a volume control. Features: 2-way bi-amplified active loudspeaker 12" bass / 1" HF speakers 90? x 60? dispersion 240 watts x 80 watts Freq. response: 65Hz - 18kHz Max .SPL: 118 dB SPL Multi-function housing XLR and 1/4" inputs Mic line input, switchable XLR parallel out Dynamic softclip limiter
Click here to buy
More info: DB Technologies BASIC-200 12 Active Biamp Speaker
The nicest and most simpatico sound engineer you will ever meet is inside VoiceTone Correct. It combines pitch correction with tone and dynamic shaping that put a recorded gloss on live singing. Sensing algorithms developed at TC-Helicon automatically adjust the recording industry techniques of multiband EQ, compression and de-essing for you, so you get the best sound with the least amount of effort. Partner your new sound with auto-chromatic pitch correction which helps you sing more in tune, much like a metronome helps for playing in time. The miniaturization of sound engineers and vocal coaches was a challenge, but the results will surely impress you and your audience! Specifications: Analog Inputs Connectors Balanced XLR Input Impedance 1 kOhm Mic Input Sensitivity @ 0 dBFS -44 dBu to +2 dBu Mic Input Sensitivity @ 12 dB headroom -56 dBu to -10 dBu EIN -128 dBu @ max. mic amp gain, Rg = 150 Ohm Analog Outputs Connectors Balanced XLR Output Impedance 40 Ohm Output Level @ 0dBFS +2dBu Input to Output Analog Audio Performance Dynamic Range, Mic. @ Min gain >108 dB, 20 Hz - 20 kHz (A-weighted) Dynamic Range, Mic. @ -18dBu sensitivity > 104dB, 20hz – 20kHz (A-weighted) THD+ Noise, Mic. @ Min gain <-90dB Frequency Response, max gain -1.5 dB @ 40 Hz, +0/-0.3 dB (200 Hz to 20 kHz) Conversion Characteristics Sample Rate: 48 kHz Converter: AKM AK4620B A to D / D to A Conversion: 24 bit, 128x oversampling bitstream A to D Delay: 0.65 ms D to A Delay: 0.63 ms EMC Complies with: EN 55103-1 and EN 55103-2 FCC part 15, Class B, CISPR 22, Class B
Click here to buy
More info: TC Helicon VoiceTone Pitch Correction Pedal
Cool, quiet operation. Designed for studio use, each RA series amp incorporates advanced convection cooling for heat dissipation. The result is long, stable operation unaffected by heat-related complications, without the added distraction and annoyance of fan cooling. And eliminating the danger of losing hard-to- hear details due to noisy amp performance. General Specifications Height: 2 RU Rated output: per channel 4 ohms: 150 watts RMS per channel 8 ohms: 90 watts RMS per channel 8 ohms: 300 watts RMS, bridged mode Signal to Noise Ratio: >105dB Frequency Response:10Hz - 70kHz +0, -3dB Distortion: Input Sensitivity: +4dB for rated output Crosstalk: -85dB, 1kHz Output offset: +/- 50 mV, Servo controlled
Click here to buy
More info: Alesis RA300 Power Amplifier
DB TECHNOLOGIES Basic 100: Powered Speakers For The Budget-Minded The Basic 100 speakers from dB Technologies is made for the economic range of the market, providing a high quality product with great audio features. Like any dB Technologies product, the Basic 100 offers high reliability, market driven features and is designed to match the demands of beginners, DJs, schools, churches and many other applications where budget orientated solutions are required. The Basic 100 is equipped with a 10" woofer and a 1" HF driver, powered by two separate amplifiers with integrated phase and sound correction circuits. The speaker is protected against overload and distortion through a built in Limiter, with a Status-LED indication. The input sensitivity can be switched from line to microphone level, using the XLR or 1/4" input plug. The output level can be adjusted with a volume control. Features: 2-way bi-amplified active loudspeaker 10" bass / 1" HF speakers 90? x 60? dispersion 70 watts x 20 watts Freq. response: 70Hz - 20kHz Max .SPL: 117 dB SPL Multi-function housing XLR and 1/4" inputs Mic/line input, switchable XLR parallel out Dynamic softclip limiter
Click here to buy
More info: DB Technologies BASIC-100 10 Bi Amped Speaker
DB TECHNOLOGIES Basic 400: Powered Speaker With 550 Watts The Basic 400 speakers from dB Technologies is made for the economic range of the market, providing a high quality product with great audio features. Like any dB Technologies product, the Basic 400 offers high reliability, market driven features and is designed to match the demands of beginners, DJs, schools, churches and many other applications where budget orientated solutions are required. The Basic 100 is equipped with a 12" woofer and a 1"HF driver, powered by two separate amplifiers with integrated phase and sound correction circuits. The speaker is protected against overload and distortion through a built in Limiter, with a Status-LED indication. The input sensitivity can be switched from line to microphone level, using the XLR or 1/4" input plug. The output level can be adjusted with a volume control. Features: 2-way bi-amplified active loudspeaker 12" bass / 1" HF speakers 90? x 60? dispersion 450 watts x 100 watts Freq. response: 60Hz - 18kHz Max .SPL: 125 dB SPL Multi-function housing XLR and 1/4" inputs Mic line input, switchable XLR parallel out Dynamic softclip limiter
Click here to buy
More info: DB Technologies BASIC-400 12 Active Biamp Speaker
M-AUDIO EX66 Hi Definition Active Studio Monitor The M-Audio EX66 monitor is the culmination of years of research developing cutting-edge high-definition active reference monitor technology. Our midwoofer-tweeter-midwoofer (MTM) design yields a wide sweet spot while minimizing room reflections. The unique low-frequency drivers and custom titanium high-frequency driver deliver exceptional smoothness and transparency across the entire audio band, without resonant peaks?and the drivers are impervious to environmental conditions such as heat, humidity, and sunlight. Onboard DSP handles cabinet resonance tuning and crossover optimization to round out an incredibly accurate frequency response. Digital inputs compatible with up to 24-bit/192kHz signals and high-impedance balanced analog inputs insure that your signal path is entirely pristine. Both the specs and the sound are unrivaled at any price, let alone this value. Sold individually, the M-Audio EX66 represents a new high-resolution standard for both 2-channel and multichannel applications. Features: MTM configuration yields wide sweet spot with reduced room reflections two 6? custom linear-piston woofers deliver high durability with exceptional definition and precision 1? titanium dome tweeter produces smooth transparency without high-frequency smearing bi-amplified with 200 watts PWM power per channel DSP-tuned cabinets and crossovers for extremely accurate frequency response with no resonant peaks high-impedance analog inputs (XLR and " TRS balanced) S/PDIF and AES/EBU digital input up to 24-bit/192kHz for total digital studio connectivity 32-bit digital signal processing OptImage II high-frequency wave guide minimizes diffraction Acoustic Space control optimizes low-frequency response based on room placement soft limiter circuit to prevent clipping calibrated volume control/input sensitivity control high-frequency roll-off/boost switch mid-range ?presence? switch (low-Q dip or peak) low-cutoff switch (37Hz, 80Hz, 100Hz) custom-designed MDF cabinet internal adiabatic foam absorbs standing waves and enhances low-frequency response and efficiency dual flange rear-port design to minimize air turbulence and associated friction noise Analog Inputs: XLR balanced, ?” TRS balanced Digital Inputs: S/PDIF - In and Thru Size: 19″H x 8.25″W x 9.5″D Weight: 24.65 lbs
Click here to buy
More info: M-Audio EX66 Hi Def Active Studio Monitor (Each)
Bass Response If you need the kind of bass response normally only available from a large speaker system without giving up the compact convenience and positioning ease of the MSP5 or MSP10, simply add an SW10 Powered Subwoofer for solid, accurate bass response down to well below the audible limit. New Long Stroke Woofer The SW10 features a newly designed long-stroke 25-cm (10″) woofer which achieves exceptionally smooth, accurate low-frequency reproduction, while a built-in high-performance 180-watt power amplifier delivers solid, highly damped power. Variable Pass Filter A variable low pass filter (40 Hz ~ 120Hz) makes it easy to achieve optimum crossover with just about any main speaker system, and a built-in phase switch allows instantaneous phase reversal without having to modify cables or connections. Variable XLR-Type Inputs and Outputs The SW10 features three balanced XLR-type inputs and outputs (the outputs feed the audio signal through to the main speakers) for direct compatibility with professional equipment. Features: Type: Amplified bass-reflex powered speaker Overall Frequency Response: 25Hz ~ 150Hz (-10dB) Maximum SPL: 111dB (1m on axis) Size: ( W x H x D) 328 x 459 x 476mm (12-7/8″ x 18-1/16″ s 18-3/4″) Weight: 26kg (57.3 lbs.) Output Power: 180W at 100Hz. RL = 8 ohms Input Sensitivity/Impedance: INPUT 1~3: -6dB ~ +4dB/10K ohms/ XLR balanced S/N Greater than or = to 100dB (IEC-A weighting) Controls: MASTER VOLUME CONTROL, VARIABLE LOW PASS FILTER (40Hz~120Hz), PHASE Switch (Normal, Reverse), Power Switch: ON/OFF Power Indicator: Green/Red LED: Green = Power ON, Red = Amp. Clipping Power Requirement: US and Canadian models: AC120V 60Hz, European models: AC230V 50Hz, AT models: AC240V 50Hz Power Consumption: 160W
Click here to buy
More info: Yamaha SW10-STUDIO 10In Active Subwoofer
The PRX535 offers a high level ofperformance. By design, a 3-wayconfiguration, it is the most accurate in thePRX500 Series. With a horn loaded midrange,pattern control is maintained to a much lowerfrequency resulting in exceptional clarity anduniform sonic projection over the definedcoverage area. Ideally suited to applicationswhere the program material, live or prerecordedhas many subtle nuances that iscritical to the performance. As with all thefull-range PRX500 Series systems two EQselections can be used to optimize the systemfor the program material and/or environment.The input section also accommodates eitherLine or Mic/Instrument level inputs. The PRX535 is a self-powered, lightweight3-way loudspeaker system capable ofdelivering a very high level of performance,both in SPL and sonic accuracy. The PRX535is comprised of a 380 mm (15 in) 265FDifferential Drive woofer, a 165 mm (6.5 in)195H horn-loaded 90???? by 50???? mid-range anda 2408H 37.5 mm (1.5 in) annular polymerdiaphragm, neodymium compression drivermounted to a 90???? by 50???? horn, all driven bya multi-channel Crown International Class-Ddigital power amplifier. A propriety DSP chipis at the core of a fully featured input section,providing user selectable system EQ,protection, input sensitivity selection, crossoverfunctionality, dynamic limiting anddiscrete component optimization. The enclosure is constructed of qualityplywood and coated in JBL’s ruggedDuraFlex??????? finish. Durable polypropyleneend-caps add extra protection for the cabinet.An integrated pole mount on the bottom endcapenables easy deployment. The CNCmachinedsteel grille wraps around the sidesof the enclosure so there are no protrudinglips on the front of the box to createacoustical interference. The grille is also linedwith an acoustically transparent foam to provide additional driver protection. The amplifier input panel offers XLR or ???? inch jack compatibility and a sensitivity switchprovides extra flexibility, making it possible to connect literally any sound source withoutusing a mixer. Signal present and overload lights indicate the system status and assist insetting the optimum level, via the level control knob. Differential Drive woofer Horn loaded mid range for sonic accuracy and enhanced pattern control 1.5″ annual polymer diaphragm compression driver Class-D, Crown digital amplifier: lightweight, compact, multi channel, heritage DSP input section with crossover, dynamic limiting, component optimization, selectable system EQ Professional XLR line and ????” Mic/Instrument inputs, with loop through Illuminated logo for clear Power-On status Integrated pole mount socket DuraFlex??????? coated plywood construction Polypropylene end-caps enhance durability Wrap around heavy duty steel grille provides protection without obstructing performance. Large die-cast aluminum handle bar with a fine tuned ergonomic rubber grip for maximum comfort
Click here to buy
More info: JBL PRX535 15In 3-Way Self Powered Speaker
