Aural Exciter & Optical Big Bottom! Increases presence and clarity of audio signals, restoring natural brightness, providing greater perceived loudness plus improving “sonic detail” and intelligibility. Big Bottom circuitry provides deeper, more resonant bass with little or no increase in peak output. Features: Restores natural brightness Improved detail and intelligibility Deeper, more resonant bass with extended low frequencies Tighter bass articulation 2 independent channels XLR and 1/4″ inputs/outputs
Click here to buy
More info: Aphex 204 Aural Exciter
Some situations call for a little extra umph from the lower side of the scale. That’s when a PXW 15P is a perfect call. This 15″ powered subwoofer gives you a solid lift in the bass area with balanced XLR I/O jacks as well as a high pass XLR ouput. The back panel features LED indicators for limit, signal, protect, and power. The protect indicator will glow when the subwoofer is getting too hot, it then goes into protect mode and stops all output to save your investment. Features 15″ powered subwoofer Attached wheels on the subwoofer Limit Indicator lets you know when built-in limiter is active Signal Indicator glows when when there a signal is received to the Full Range input Subwoofer gain control knob regulates the output level of the subwoofer, and set balance between the speakers and subwoofers. Protect Indicator glows when the subwoofer goes into protect mode which prevents the subwoofer amplifiers from getting too hot and stops all output Power LED indicates power is on Phase switch for reversing polarity of subwoofer Full range XLR input High Pass XLR output Thru full range output Built-in pole mount socket Built-in carrying handles Specs Component: 15″ Woofer (4 Ohm) Dimensions: 23.7″L x 17.2″W x 23.5″H Weight: 88 Lbs. Environmental conditions: Operational temperature: 5???? to 35????C (41???? to 95????F) Operational humidity: 25 to 85% RH (non-condensation) Storage temperature: -20???? to 60????C (4???? to 140????F) Frequency response: (-3db): 45Hz ~ 120Hz Frequency range: (-10db): 35Hz ~ 120Hz Maximum SPL at 1m: 126db Peak output at 1m: 129db Crossover frequency: 120Hz (12db/octave) Input type: balanced differential Input impedence: 50k Input protection: Level protected Thermal protection: Input stage muting, auto-reset Low-Frequency transducer diameter: 15″ Voice coil diameter: 4″ Low-Frequency Power Amplifier: Rated Power 500W continuous, 700W peak Rated THD: Cooling: Passive-Heatsink with speed sensitive electric fan
Click here to buy
More info: American Audio PXW-15P 15in Powered Subwoofer
BEHRINGER B2030A Studio Monitors: High-Resolution, Active 2-Way Reference Studio Monitor The Behringer B2030A has all of the great features of an active TRUTH monitor packed in a compact cabinet! It’s a high-resolution, active 2-way reference studio monitor that is perfect for nearfield monitoring applications: from small mixing environments to multi-channel surround setups. Despite its small size, the B2030A can achieve a peak output level in excess of 113 dB SPL. Powered by separate 75- and 35-Watt built-in amplifiers with an active crossover, these monitors provide ultra-linear frequency response from 50 Hz to 21 kHz. A long-throw 6 " woofer with a special polypropylene diaphragm delivers smooth, deep bass, while an extremely high-resolution HF driver delivers highs that are crystal-clear and full of detail. The unique BEHRINGER wave guide and the extremely low-distortion crossover network produce an absolutely linear phase response with excellent sound dispersion and stereo imaging. The B2030A is equipped with servo balanced inputs on XLR and " TRS connectors to handle a variety of audio sources. Thanks to its compact size and magnetic shielding, the TRUTH B2130A can be placed near video monitors, computer displays or digital audio workstations. The B2030As are delivered along with individual measurement diagrams. Features: Ultra-linear frequency response from 50 Hz to 21 kHz with individual frequency diagrams Built-in 75 and 35 watt power amps with enormous power reserve Ultra high-resolution ferrofluid-cooled tweeter Long-throw 6.75" woofer with special polypropylene diaphragm and deformation-resistant aluminum die-cast chassis Controlled dispersion characteristics and extremely large “sweet spot” owing to the unique BEHRINGER wave guide technology Active crossover network with 4th order Linkwitz-Riley filters Adjustable to a wide range of acoustic conditions and subwoofer operation Separately controlled limiter for low and high frequency overload protection Magnetic shielding allows placement near computer monitors Delivered as “matched pairs” with individual frequency diagrams Low-vibration and environment-friendly E1 MDF cabinet Servo-balanced inputs with XLR and ?” TRS connectors Conceived and designed by BEHRINGER Germany
Click here to buy
More info: Behringer B2030A Active Studio Monitor (Pair)
This 18″ powered subwoofer will provide plenty of boom without to shake the room. It gives you balanced in and out XLR jacks, as well as a thru full range output, gain control, LED indicators, a phase switch for switching polarity and a protect mode that will prevent the subwoofer from getting too hot by stopping all output. Features 18″ powered subwoofer Limit Indicator lets you know when built-in limiter is active Signal Indicator glows when when there a signal is received to the Full Range input Subwoofer gain control knob regulates the output level of the subwoofer, and set balance between the speakers and subwoofers. Protect Indicator glows when the subwoofer goes into protect mode which prevents the subwoofer amplifiers from getting too hot and stops all output Power LED indicates power is on Phase switch for reversing polarity of subwoofer Full range XLR input High Pass XLR output Thru full range output Specs Dimensions: 35.4″ x 28.7″ x 29.1″ Weight: 187.3 lbs. Environmental conditions: Operational temperature: 5???? to 35????C (41???? to 95????F) Operational humidity: 25 to 85% RH (non-condensation) Storage temperature: -20???? to 60????C (4???? to 140????F) Frequency response: (-3db): 35Hz ~ 120Hz Frequency range: (-10db): 25Hz ~ 120Hz Maximum SPL at 1m: 128db Peak output at 1m: 134db Crossover frequency: 120Hz (12db/octave) Input type: balanced differential Input impedence: 50k Input protection: Level protected Thermal protection: Input stage muting, auto-reset Low-Frequency transducer diameter: 18″ Voice coil diameter: 4.0″ Low-Frequency power amplifier: Rated Power* 800 Watts Continuous, 1000W Peak Rated THD: Cooling: Passive-Heatsink with speed sensitive electric fan
Click here to buy
More info: American Audio PXW-18P 18in Powered Subwoofer
The CVA-28 is a totally integrated, matched, and optimized active speaker system that provides powerful sound in a small, modular package. The system configuration starts with an innovative, 3 way, dual 8 design. The dual 8 configuration was chosen for optimized directivity and extremely clean, off axis response. The custom designed Cerwin-Vega! drivers also provide superior power handling, tight bass and refined mid-range. Finally, a compression driver is placed in the center of the top woofer in a concentric configuration. This design provides time-aligned high frequencies for incredible detail and imaging. Matched to this impressive transducer array is a 400 watt integrated 3-way amplifier. With 800 watts peak output, the amplifier includes a dedicated EQ contour switch optimized for high SPL situations. A Sub/No Sub switch allows users to roll off the low end when used with a dedicated subwoofer, eliminating competing frequencies in the system. Connections include microphone, line, and instrument inputs through XLR and quarter inch connectors.The CVA-28 can be mounted or installed in a myriad of ways thanks to integrated fly points, flyware kits, pole mount, and dual and triple speaker mount accessories. With or without its ActiveSeries subwoofer partners, the CVA-28 is just the best sounding active full range speaker in its class. Whether it’s hip hop, jazz, bluegrass or rock and roll, the CVA-28 provides the performance, power and flexibility you just can’t find elsewhere. If you’re looking for an upgradeable and accurately voiced speaker as part of your performance arsenal, the CVA-28 is the way to go.
Click here to buy
More info: Cerwin Vega CVA-28X Dual 8in Active Speaker
Mackie SWA1801: Compact And Powerful Subwoofer The SWA1801 is a versatile 18-inch high output, active subwoofer system. It features a newly designed high precision 18-inch transducer combined with application specific amplifier technology. The system is composed of a single, compact subwoofer cabinet with built-in control and amplifier electronics. The transducer used in the SWA1801 system features an RCF Precision 4-inch, inside/outside wound voice coil that offers extreme power handling capabilities.The magnetic assembly used features advancements in coil venting, composite polyimide former construction and structural cooling that provides lower temperature rise and substantially improved power compression characteristics. The amplifier module found in the SWA1801 cabinet is an example of application specific amplifier design that can be exercised when designing active speaker systems. The system uses a proprietary high efficiency, high current amplifier module designed to provide highcurrent levels at all levels of operation. Having access to high current levels, no matter what the power output, is absolutely critical in achieving precise, total control of the woofer mass. This control is responsible for lowering audible distortion artifacts and providing aggressive attack through the operating band pass of the system. The amplifier module is mounted on a large, finned aluminum heat sink. The amplifier system is rated at 900 watts RMS of continuous output and 1400 watts peak output.The SWA1801 features a sophisticated onboard control system allowing for flexible integration with active or passive full range or mid/high speaker systems. The input panel accepts line level input signal and has LOOP OUT connectors for signal routing to other devices. It also has HIGH PASS out connectors for connection to active full range speakers or amplifiers powering passive full range speakers. All signal routing is through XLR connectors in L/R stereo or mono. There is a phase selection switch and a recessed level control. The system features thermal protection for the power supply and amplifier module and also incorporates RMS limiting protection for the amplifier stage that limits the amount of long term power deliver to the transducer. The cabinet is constructed using 18mm thick multi-layered birch plywood and finished in black splatter paint. There is one handle on each side for efficient loading and transport as well as a female pole mount fixture. Active doesn’t mean it has an amplifier bolted on the back, it means seamless integration of optimized electronics that provide complete control and maximum performance. The on-board control system provides crossover filters, equalization, protection for speaker components and electronics as well as real time active vigilance over the operating parameters of the system. Features: 135dB peak output Extremely powerful with ultra-high output levels Superior bass response from a compact enclosure Extend the b
Click here to buy
More info: Mackie SWA1801Z 18In Powered Subwoofer
